online Grocery, Vegetables, Cakes, Raw Chicken,

  • slider-image1

BT-31A PIR Motion Sensor With Light Sensor, Energy Saving Motion Detector Switch(Wall Mounted),White

549.00 1000.00

The product is new energy saving device, it adopts good sensitivity detector, itegrated ckt. It gathers automatism, convenience, safety,saving energy & physical functions. It works by receivging human motion infrared rays. Automatic light control sensor Pir motion sensor with light sensor Energy saving motion detector Wall mounted Easy installation Use: Home, office, shops, hospitals, hotelas, bathroom, corridor, step, parking area. Product Installation: 1)Keep sensor unit 1.6 mtr higher from the ground level. 2)The light, such as incandescent lamp which emits high heat should be kept from the switch aways, or it will be turn on/off voluntarily. 3)On being fixed to the wire first time, the switch' initialization will take 1-2 minutes. It's natural for the switch to turn on/off voluntarily. 4)When you install the switch on daytime, the default state of the switch will make the light off.Keep the detector of the switch from illumination, & then the light will turn on. 5)The darker, the switch will be more sensitive. If it is not very sensitive, turn the yellow port counterclockwise with a long and thin tool to get a proper light sensitivity.

Specifications: 1)Operating Volt: AC 220-250V 50Hz-60Hz. 2)Load power: Upto 300/1200W Max 3)Ambient Light: 3-2000 (Adjuestable) 4)Load type: Incandescent lamp, LED light, CLF, fans, etc 5)Detecting distance: 10~12 Mtrs(Dept temp) 6)Detecting Angle: 180 Degree. 7)Installtion Hight: 2.2-4 Mtr 8)Motion Detetion Speed: 0.6~1m/s 9)Power Cusumption:0.1W (static) & 0.4(Work) 10)Working Humidity: less than 93%RH 11)Delay: 10 Seconds -7 Minutes (Adjustable)